Waterloo 14" x 16" x 10" 18 Gauge Stainless Steel One Compartment Undermount Sink

Equip your kitchen, prep area, or bar with this Waterloo 14" x 16" x 10" 18 gauge stainless steel one compartment undermount sink. This sink features an undermount design. That means it is secured to the bottom of the countertop for a clean, professional, seamless installation. It's perfect for use in a front of the house bar area, or as an addition to a prep area where you need an extra handwashing, utility, or dump sink.

Designed for durability, corrosion-resistance, and sanitation this sink bowl is made of deep drawn 18 gauge, type 304 stainless steel. It features 2" radius corners that prevent grimy build-up and allow clean rinsing. To help reduce ambient noise in your busy kitchen or bar, this sink comes with sound deadening patches that are ready to install. Plus, the 3 1/2" drain opening is ready for installation so you can get your new sink up and running.

To get your sink up and running as quickly as possible, this unit comes with the required installation hardware.

Overall Dimensions:
Length: 16 1/2"
Width: 18 1/2"
Height: 10"

Bowl Dimensions:
Length: 14"
Width: 16"
Depth: 10"

Overview

Undermount design enables sleek installation for a seamless surface
Deep drawn 18 gauge type 304 stainless steel construction
3 1/2" drain opening
Comes with sound deadening patches to reduce ambient noise in your kitchen
Features 2" radius corners for ease of cleaning

NSF Listed

This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

Specs

Length16 1/2 Inches

Width18 1/2 Inches

Height10 Inches

Bowl Depth10 Inches

Bowl Front to Back16 Inches

Bowl Left to Right14 Inches

ColorSilver

Corner Radius2 Inches

Edge StyleFlush

FeaturesNSF Listed

Gauge18 Gauge

Installation TypeUndermount

MaterialStainless Steel

Number of Compartments1 Compartment

Stainless Steel TypeType 304

TypeUndermount Sinks

Features

Corrosion Resistant
Designed for durability, corrosion-resistance, and sanitation, this sink bowl is made of deep drawn 18 gauge, type 304 stainless steel. It features 2" radius corners that prevent grimy build-up and allow clean rinsing.
Installation Hardware Included
The 3 1/2" drain opening is ready for installation so you can get your new sink up and running. To get your sink up and running as quickly as possible, this unit comes with the required installation hardware.

Resources & Downloads

Download useful documents and assets for this product.

Customer Q&A

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
If you're choosing a drop-in sink, this information should be provided in the specifications for the product. The cutout must be large enough to accommodate the sink bowl(s) but also not bigger than the lip of the sink, which overhangs the cutout and holds it in place.

If you're choosing an undermount sink, the sink will install underneath the counter, so your cutout size should be about the same as the total, combined dimensions of your sink bowl(s) for a clean look. Your countertop must also have a finished edge around the cutout, since top of the bowl installs below the cut, leaving it exposed.