750PKF68

A man in an apron using a Waterloo wall-mounted pot and kettle filler hose.

A silver and blue Waterloo wall-mounted pot and kettle filler faucet.

A silver Waterloo wall-mounted pot and kettle filler with a blue handle.

Item #750PKF68

Waterloo Wall-Mounted Pot and Kettle Filler with 68" Hose and Vacuum Breaker

This Waterloo wall-mounted pot and kettle filler features a 4" long nozzle with a spray valve and hook nozzle. Its flexible, 68" stainless steel hose allows for easy long-distance use. A vacuum breaker prevents backflow.

A 1/2" NPT female connection enables consistent access to the single inlet faucet with lever handle that controls both hot and cold water. This faucet also has a 2.6 GPM for a strong, steady flow. This filler comes with a ceramic cartridge that enables long-lasting product life and better control of flow and temperature.

Overall Dimensions:
Hose Length: 68"
Nozzle Length: 4"

Overview

Hook nozzle
68" hose
Single inlet faucet
1/2" NPT female connection
Includes vacuum breaker

CSA, US and Canada

This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.

NSF Listed

This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

Specs

Hose Length68 Inches

Spout Length4 Inches

Cartridge TypeCeramic

Connection1/2"

Faucet CentersSingle

FeaturesANSI/ASSE 1001-2008

FeaturesCSA B64.1.1-11

FeaturesNSF Listed

FeaturesVacuum Breaker

Flow Rate2 3/5 GPM

Handle TypeLever

Mounting StyleWall Mounted

Spout TypeHose and Fill Valve

Temperature Rating140 Degrees F

Temperature Rating40 Degrees F

TypePot / Kettle Fillers

Features

Ceramic Cartridge
This filler comes with a ceramic cartridge that enables long-lasting product life and better control of flow and temperature.
1/2" NPT Connection
A 1/2" NPT female connection enables consistent access to the single inlet faucet with lever handle.

Resources & Downloads

Download useful documents and assets for this product.

Replacement Parts

Included parts that allow for proper installation

View all Replacement Parts

Customer Q&A

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
This product cannot be shipped to Canada.
When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
For both wall and deck mounted faucets, installation kits are sold separately. Check the Works With items to find the proper installation kits and parts!